Chin Cheung offers a wide range of rubber sheets as follows :

Style 126 Natural Rubber Sheet

Water proof, anti-shock and airproof

Appllied in seal buffer washers, rubber mat, seals and decoration.

Description: Black Natural Rubber offering exhibits extremely good resiliency and abrasion resistance.

Applications: It has good tear strength and is resistant to water, most salts and mild acids.

Technical data:

Hardness: Duro 70 +/- 5

Elongation: MIN 250%

Tensile strength: MIN 400psi

Temp. Range: -15 ^oC to +70 ^oC

Colour: Black

Product Standard:

Thickness: 1-80mm

Sheet size:

- Standard: 500-2000mm width x Linear M

Style 136 EPDM Rubber Sheet

Superior properties for outdoor and high temperature applications

Description: EPDM is widely used in outdoor applications where it will withstand abuse from sunlight, ozone, and oxidants. Good electrical resistivity, high heat acceptance and no loss of properties at low temperatures.  

Applications: Excellent resistance to animal and vegetable oils, water, steam and oxygenated solvents. Good resistance to alkalis, acids
Technical data:

Hardness: Duro 60 +/- 5

Elongation: MIN 250%

Tensile strength: MIN 800psi

Temp. Range: -40 ^oC to +120 ^oC

Colour: Black

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm 

Sheet size:

- Standard: 1.2M width x Linear M

Style 168 Neoprene Rubber Sheet

Moderate degree to oil, gasoline, oxidation and aggressive chemicals type

Description: Neoprene's uniqueness is its ability to combine properties moderately into a multipurpose polymer.

Applications: moderate oil and gasoline resistance, very good resistance to ozone and sunlight, excellent adhesion to fabric and metals, good resistance to abrasion and flex cracking and moderate resistance to alkalis and acids.

Technical data:

Hardness: Duro 60 +/- 5

Elongation: MIN 300%

Tensile strength: MIN 900psi

Temp. Range: -30 ^oC to +80 ^oC

Colour: Black

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm 

Sheet size:

- Standard: 1.2M width x Linear M

Style 168R Rubber Diaphragm Sheet

Cloth reinforcement enhances dimensional stability in flanged gasket applications

Description: A blended Neoprene compound with one or more polyester fabric plies, for service where dimensional stability is required.

Applications: Suitable for use where moderate oil resistance is required and where hot and cold water and gases are being conveyed.

Technical data:

Hardness: Duro 70 +/- 5

Elongation: MIN 300%

Tensile strength: MIN 1100psi

Temp. Range: -30 ^oC to +80 ^oC

Finish : Smooth

Colour: Black

Product Standard:

Thickness: 1/32”, 1/16”, 1/8”, 3/16” and 1/4”

Sheet size:

- Standard: 1.2M width x Linear M

Style 169 Nitrile Rubber Sheet

Oil and Solvent Resistant type

Description: Nitrile is the polymer of choice for applications requiring oil and solvent resistance.

Applications: For mineral oils, petroleum, based fluids, aromatics, gasoline.

Technical data:

Hardness: Duro 60 +/- 5

Elongation: MIN 200%

Tensile strength: MIN 900psi

Temp. Range: -30 ^oC to +120 ^oC

Colour: Black

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm

Sheet size:

- Standard: 1.2M width x Linear M

Style 169F FDA Nitrile Rubber Sheet

Good oil and abrasion resistance and handles oily and greasy food products well

Description: A sheet specially formulated for its whiteness. Made from FDA-approved ingredients per 21CFR 177.2600, it is non-toxic, non-marking, and non-allergenic. It has good oil and abrasion resistance.

Applications: Used in food, pharmaceutical, and cosmetic processing. and handled oily and greasy food products well.

Technical data:

Hardness: Duro 60 +/- 5

Elongation: MIN 500%

Tensile strength: MIN 1000psi

Temp. Range: -32 ^oC to +83 ^oC

Colour: White

Product Standard:

Thickness: 1/16”, 1/8”, 3/16” and 1/4”

Sheet size:

- Standard: 914mm width x Linear M, 1.2M width x Linear M

Style 189 Red Rubber Sheet

An economical red sheet for use in low pressure applications with no oil resistant requirements.

Description: Red rubber sheets have properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.

Applications: Popular flange gasket material for hot or cold water, air and steam (not exceeding 100 PSI). All mating flanges wherever a quality rubber sheet are required.

Technical data:

Hardness: Duro 75 +/- 5

Elongation: MIN 150%

Tensile strength: MIN 400psi

Temp. Range: -40 ^oC to +80 ^oC

Finish : Smooth

Colour: Red

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm

Sheet size:

- Standard: 1.2M width x Linear M

Style 192 Silicone Rubber Sheet

Withstand a wider range of temperature from -55°C to +232°C

Description: Silicone has excellent tensile strength, elongation, tear strength, compression set and high temperature properties.

Applications: This material also provides excellent UV and ozone resistance. It is non- toxic, chemically inert and fungus res, istant. It can resist water and many chemicals, including some acids, oxidizing chemicals and ammonia.

Technical data:

Hardness: Duro 60 +/- 5

Elongation: MIN 300%

Tensile strength: MIN 600psi

Temp. Range: -55 ^oC to +232 ^oC

Finish : Smooth

Colour: Red, White, Translucent white

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm

Sheet size:

- Standard: 1.2M width x Linear M

Style 195 Viton Sheet

Excellent heat stability (200°C) and resistance to aggressive fuels and chemicals.

Description: Particularly valued for its excellent heat stability (200°C) and resistance to aggressive fuels and chemicals, Viton® is the most specified fluoroelastomer for fuel system seals, expansion joints and gaskets.

Applications: This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids.

Technical data:

Hardness: Duro 70 +/- 5

Elongation: MIN 200%

Tensile strength: MIN 800psi

Temp. Range: -30 ^oC to +232 ^oC

Finish : Smooth

Colour: Black

Product Standard:

Thickness:

- 1/16”, 1/8”, 3/16” , 1/4”, 3/8” and 1/2”

- 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

Sheet size: